The R&S®SMA100B signal generator offers a remote emulation feature that makes it possible to control the instrument by commands other than the built-in native SCPI commands. This feature allows the user to replace signal generators, e.g. from other manufacturers, with the R&S®SMA100B without having to change the remote control code.This application note describes how to use the remote emulation feature in general. Furthermore, it describes in detail the remote emulation for each supported instrument, limitations of the individual emulations and the remaining differences between the emulated and the original commands.

11-Dec-2019 | AN-No. 1GP120

The R&S®SMA100A signal generator offers a remote emulation feature that makes it possible to control the instrument by commands other than the built-in native SCPI commands. This feature allows the user to replace signal generators, e.g. from other manufacturers, with the R&S®SMA100A without having to change the remote control code. This application note describes how to use the remote emulation feature in general. Furthermore, it describes in detail the remote emulation for each supported instrument, limitations of the individual emulations and the remaining differences between the emulated and the original commands.

17-Aug-2015 | AN-No. 1GP93

Noise Power Ratio Signal Generation and Measurement

Noise Power Ratio (NPR) is an add-on tool for WinIQSIM™ to generate noise power ratio stimulus signals and measure the resulting noise power ratio of a device under test (DUT) using Rohde & Schwarz instruments via LAN or GPIB bus.

06-Nov-2015 | AN-No. 1MA29

Connecting simulation and measurements on physical devices

This application note is based on collaborative work between MathWorks® and Rohde & Schwarz. The focus is on linearization of a non-linear device, in our case the RF power amplifier. It is shown how simulation and the integrated functions of the Rohde & Schwarz instruments R&S®SMW200A and R&S®FSW work hand-in-hand with the simulation capabilities from MathWorks in MATLAB / Simulink. The goal is to provide a toolset to enable proper modeling and linearization approaches to optimize and verify the behavior of the power amplifier when used with complex wideband signals as used in 5G NR or latest satellite links.The application note brings code examples and an exemplary block set for MATLAB / Simulink to provide an easy start to replicate and use the described procedure.

05-Aug-2021 | AN-No. 1SL371

With a Rohde & Schwarz oscilloscope

25-Sep-2019

This application note provides information how to perform noise figure measurements under pulsed or bursted conditions with spectrum analyzers and noise sources, and introduce the capabilities of the Rohde & Schwarz FSW signal and spectrum analyzer to perform this measurement.

28-Jun-2018 | AN-No. 1EF103

Application Note 1MA68 has been replaced by .

10-Dec-2008 | AN-No. 1MA68

Analysis, 5G FR1 MIMO signals, R&S®NRQ6, R&S®VSE Measurement of the phase difference between the MIMO layers is a challenging task in the design of 5G base stations. However, this measurement and its analysis can be easily accomplished using the R&S®NRQ6 frequency selective power sensor and R&S®VSE signal explorer software. Analysis of 5G FR1 MIMO signals with R&S®NRQ6 and R&S®VSE Analysis, 5G FR1

14-Jan-2022

The new buffer analysis feature was introduced with firmware version 2.80 for the R&S DVM family. This application note describes this feature and explains how it represents a valuable asset to your daily business operations This application note first provides background information and then explains how monitoring and measurement have been implemented in the R&S DVM family.

23-Mar-2006 | AN-No. 7BM53

RF performance measurements for Wi-Fi 7.

30-May-2022

Simultaneous DL throughput verification and UL transmission testing with the R&S®CMW500

29-Jul-2009

Current Radar development is focusing the area of signal processing. This is taken into account by this educational note, where the R&S®SMW / SMBV instruments on the transmitter side and R&S®FSW / FSV instruments on the receiver side are combined to a closed loop Radar system, performing radar detection by means of pulse compression and digital signal processing. Appropriate Rohde & Schwarz sofware tools for such applications are described as well as the interface between the tools and the test instruments. Target reader group are engineering students who want to perform tests using pulsed or chirped signals.

20-Nov-2014 | AN-No. 1MA234

With the start and spread of 5G communications services and new form factors such as wearables and foldable phones, an increasing number of flexible printed circuit boards (PCB) that support high frequency signals are being produced. These boards must exhibit excellent frequency characteristics. In the past, a PCB’s frequency characteristics were subjected to sampling inspection using a test coupon. For flexible PCBs, a new method is needed to provide repeatable and proper verification. The Yamaha® MP Series combined with the R&S®ZNBT vector network analyzer measure the high frequency characteristics of a production lot at high speed and high accuracy, enabling 100 % measurement of mass produced rigid and flexible PCBs.

27-Jan-2020

This application note describes how to test and perform a WLAN power measurement using the R&S CMU200 by means of remote-control or manual operation.

18-Oct-2005 | AN-No. 1CM55

Rohde & Schwarz recognizes the potential risk of computer virus infection when connecting Windows®-based test instrumentation to other computers via local area networks (LANs), or using removable storage devices. This white paper introduces measures to minimize malware threats and discusses ways to mitigate risks while insuring that instrument performance is not compromised. The paper discusses the use of anti-virus software, with recommended configuration settings. It also outlines how to keep the Windows® XP operating system properly updated through regular installation of OS patches.

04-Oct-2012 | AN-No. 1EF73

The impedance of real-world passive components depends on frequency, signal level and DC bias. This has to be taken into account during circuit design. The R&S®LCX LCR meter is ideal for measuring these dependencies. The R&S®LCX sweep tool is an application program for conveniently performing such sweeps and displaying the results on charts.

17-Mar-2022

For measurements of non-connectorized devices, test fixtures, probes or other structures are used to adapt from the coaxial interface of the test setup to the device under test (DUT). For accurate measurements of the DUT, these lead-ins and lead-outs need to be characterized, so that their effects can be mathematically removed, i.e. de-embedded from the measurement results.This application note provides practical hints to accurately characterize and de-embed these lead-in and lead-out structures with R&S Vector Network Analyzers ZNA, ZNB, ZNBT and ZND. As de-embedding is also essential in other test equipment like oscilloscopes, etc., this guide also describes, how lead-ins and lead-outs can be accurately characterized with a VNA and then exported as an S-Parameter file to be used by other test instruments.

19-Sep-2022 | AN-No. 1SL367

An automated test solution based on the R&S®CMW wideband radio communication tester fully supports the new test cases for real-time submeter positioning.

10-Jun-2022

The R&S®FSW offers a variety of different bandwidth options and makes it possible to combine these with external harmonic mixers to enlarge the analyzer’s frequency range up to 325 GHz. This application card will give some guidance as to the possible combinations of bandwidth options and mixers in conjunction with the needed IF frequencies.

16-Jun-2020

Rohde & Schwarz mobile network testing solutions enable operators to efficiently increase network capacity via hardware-related, capacity-enhancing features such as antenna tilt optimization, carrier aggregation, 4x4 MIMO and 6-sector sites.

09-Aug-2016

Sequencer Software Tool

20-Feb-2015

The R&S WiMAX application firmware R&S FSx-K93 calculates several different power parameters. This application note describes the basic power measurements of WiMAX OFDMA signals and gives an overview of the calculation of the different values.

11-Jul-2007 | AN-No. 1EF60

3GPP TS36.141 defines conformance tests for EUTRA base stations (eNodeB). Release 14 added several tests, especially for enhanced License Assisted Access (eLAA).This application note describes how all required receiver (Rx) tests (TS36.141 Chapter 7) can be performed quickly and easily by using vector signal generators from Rohde & Schwarz. A few tests additionally require spectrum analyzers from Rohde & Schwarz.Examples illustrate the manual operation. A free software program enables and demonstrates remote operation.The LTE base station transmitter (Tx) tests (TS36.141 Chapter 6) are described in Application Note 1MA154.The LTE base station performance (Px) tests (TS36.141 Chapter 8) are described in Application Note 1MA162.

11-May-2016 | AN-No. 1MA195

Unique automatic level controlled (ALC) based test setup using the R&S®ZVA vector network analyzer and R&S®BBA150 broadband amplifiers provides highly accurate and reproducible results in minimum test time.

27-Sep-2013

This application note presents means to determine the quality of color-reproduction on TVs and monitors using the R&S®DVSG Digital Video Signal Generator in combination with the Konica Minolta CS-2000 spectroradiometer and the accompanying Konica Minolta CS-S10w analysis software.

13-Aug-2010 | AN-No. 7BM78

The R&S CMU300 combines high-precision Node B parameter tests with layer 1 signalling processes for the first time. Thus, you can now test Node Bs under more realistic conditions as it was possible with existing concepts. This document describes the new measurement functions and provides an overview of their applications.

10-Nov-2005 | AN-No. 1CM58

This Application Note describes measurements compliant with the cdma2000 base station standard described in 3GPP2 C.S0010 / TIA/EIA-97 / ARIB STD-T64-C.S0010.The primary focus is on solutions for generating and analyzing cdma2000 signals. The special characteristics that make the selected signal generators and signal analyzers eminently suitable for this purpose are detailed, and remote control programming is demonstrated by a free of charge program.

05-Sep-2003 | AN-No. 1MA61

This document describes WLAN tests which rely on communication (signaling) between R&S®CMW and device under test (DUT) and on transmission of packet data over WLAN. On the R&S®CMW side the WLAN Signaling application is required, for some tests also the Data Application Unit (DAU).The test principles and the necessary settings are explained and background infor-mation is given. Step-by-step procedures are provided for the main configuration tasks.

08-Feb-2016 | AN-No. 1C107

The topic of this application note is mobile phone measurements – in theory and in practice. It discusses measurements according to the most common standard in use today, GSM.The first, theoretical portion of this application note covers digital modulation and access methods in general. This is followed by an overview of the specific characteristics of the GSM standard as well as a summary of the most important mobile radio measurements.The second, practical portion of this application note covers some of these measurements in detail and runs through them step by step. These measurements can be performed by small groups in labs.The measurements and analysis of the results are intended to illustrate the theoretical portion of the application note and to deepen the reader's understanding.All measurements are performed using the R&S®CMW500 wideband radio communication tester and an off the shelf mobile phone.

22-Aug-2014 | AN-No. 1MA231

The R&S®Pulse Sequencer software together with the R&S®SMW200A vector signal generator offers a simple and easy way to simulate multi-emitter environments. It enables engineers to validate and verify the EW receiver performance.

13-Nov-2018