R&S®MXO 4 Oscilloscope

Next generation oscilloscope for accelerated insight

R&S®MXO 4 Oscilloscope
Mostrami altri dettagli
R&S®MXO 4 Oscilloscope
Mostrami altri dettagli
R&S®MXO 4 Oscilloscope
Mostrami altri dettagli
R&S®MXO 4 Oscilloscope
Mostrami altri dettagli
R&S®MXO 4 Oscilloscope
Mostrami altri dettagli

Key Facts

  • Bandwidth: 200 MHz - 1.5 GHz
  • World’s first oscilloscope with an update rate > 4.5 million waveforms per second and industry leading spectrum acquisition rate of 45,000 FFT/s, with up to 4 spectra
  • Industry-leading system architecture: 18-bit vertical resolution/12-bit ADC, 10-bit ENOB
  • Zone trigger on analog, spectrum and math
  • Deepest in class standard memory: 400 Mpoints

A partire da 8.860 EUR

NEXT GENERATION TECHNOLOGY

The R&S®MXO 4 series is the first of a new generation of oscilloscopes that excels in both performance and value. The instruments deliver a once-in-a-decade engineering breakthrough for accelerated insight.

They have the world’s fastest real-time update rate of 4.5 million waveforms/s, meaning engineers can see more infrequent events than with any other instrument. The 12-bit ADC in the R&S®MXO 4 series has 16 times the resolution of traditional 8-bit oscilloscopes at all sample rates for more precise measurements without any compromises. A standard 400 Mpoint acquisition memory on all four channels and an optional 800 Mpoint interleaved memory provide the instrument with up to 100 times the standard memory of comparable instruments.

A class above similar oscilloscopes, R&S®MXO 4 series oscilloscopes sport an impressive 13.3" Full HD capacitive touchscreen and an intuitive user interface with a learning curve of less than 15 minutes.
 

Features & benefits

Find signal anomalies quickly

... with unparalleled update rate
 

  • > 4.5 million waveforms/s.
  • Up to 90 % real-time signal capture
  • Fast performance with active automatic measurements, FFT or cursor measurements
  • Quickly and reliably detect sporadic signal faults

Typical update rate (left) vs. 4.5 million waveforms/s (right)
Mostrami altri dettagli

Typical update rate (left) vs. 4.5 million waveforms/s (right)

See your signals accurately

… with lowest measurement noise and highest vertical resolution
 

  • 12 bit ADC vertical resolution at all sample rates without compromise
  • 18 bit architecture with HD mode
  • Vertical scaling down to 500 μV/div at full bandwidth
  • Industry’s highest available offset range of ±5 V at 500 μV/div

Typical vertical resolution (left) vs. 18 bit resolution HD Mode (right)
Mostrami altri dettagli

Typical vertical resolution (left) vs. 18 bit resolution HD Mode (right)

Capture more time

… with the deepest standard memory
 

  • Industry’s deepest memory of 400 Mpoints per channel
  • Standard segmented memory with 10,000 segments
  • Standard history mode with 10,000 acquisitions

Slow (left) vs. fast sample rate (right) with a long capture window
Mostrami altri dettagli

Slow (left) vs. fast sample rate (right) with a long capture window

Isolate events

… with high-precision digital trigger
 

  • Industry's most sensitive trigger: 1/10,000 vertical division
  • Best in class trigger jitter of just 1 ps
  • World’s fastest trigger rearm time of < 21 ns
  • Adjustable digital trigger filters and hysteresis
  • Zone trigger capability on analog, spectrum and math waveforms

Flexible triggering with digital trigger and HD mode
Mostrami altri dettagli

Flexible triggering with digital trigger and HD mode

Superior user experience

… with advanced usability designed for touch
 

  • Quick access to important tools and menu settings
  • R&S®SmartGrid for individual waveform layouts with drag and drop
  • Enhanced touch sensitivity when changing important parameter values
  • Find features and functions faster with the new search menu
  • Remote control access wherever and whenever you need it

15-Minute learning curve, superior touch, intuitive navigation
Mostrami altri dettagli

15-Minute learning curve, superior touch, intuitive navigation

Powerful spectrum analysis

... with dedicated RF controls

  • Obtain RF insights into your measurements with up to 45,000 FFT/s
  • Pristine RF characteristics for great spectrum performance
  • Setup and analysis made easy with dedicated RF controls
  • Spectrum and time domain views, all time-correlated with independent controls
  • Automatic measurements such as peak lists, max./min. hold

Superior RF measurement capability
Mostrami altri dettagli

Superior RF measurement capability

Available models

Available options

Video correlati

Zone Trigger on Math

Use zone trigger to define trigger events graphically, also on your math signals. See how you can use this standard and unique capability on MXO oscilloscopes to trigger on specific events on your math signal.

nov 25, 2024

Zone Trigger

Use zone trigger to define trigger events graphically. See how you can use this standard feature on MXO oscilloscopes easily and reliably.

nov 25, 2024

Zone Trigger on Spectrum

Use zone trigger to define trigger events graphically, also in the frequency domain. See how you can use this standard and unique capability on MXO oscilloscopes to trigger on certain events in the frequency domain.

nov 25, 2024

Trigger and Decode on I2C Bus

Quickly and reliably trigger and decode packets from your I2C bus using either the analog or digital channels as serial bus inputs. See how you can flexibly configure the trigger, change the bit rate or threshold voltage or display a decode table.

giu 27, 2024

Frequency Response Analysis

This video shows how you can use the MXO Series K36 Frequency Response Analysis option to characterize the frequency response of your electric devices.

giu 27, 2024

Probe Positioners

This video shows you how you can better place and stabilize your probes using the the Rohde & Schwarz 2D positioner for passive probes and the 3D positioner for other probes.

giu 27, 2024

Trigger and Decode on SPI Bus

Quickly and reliably trigger and decode packets from your SPI bus using either the analog or digital channels as serial bus inputs. See how you can flexibly configure the trigger or display the decode table.

giu 27, 2024

Trigger and Decode on UART Bus

Quickly and reliably trigger and decode packets from your RS232 or RS485 buses using either the analog or digital channels as serial bus inputs. See how you can flexibly configure the trigger, change the data format or display a decode table.

giu 27, 2024

Team MXO4

Sei pronto per la prossima challenge? Si chiama neXt Entra nella nostra squadra R&S eXperts!

L'oscilloscopioMXO4 è il primo prodotto di una nuova generazione di strumenti e solo una delle challenge che Rohde & Schwarz è pronta ad affrontare.
Dai un’occhiata alle nostre offerte di lavoro e #makeideasreal

Richiedi informazioni

Hai qualche domanda o ti servono altre informazioni? Compila il modulo e ti ricontatteremo al più presto.

Autorizzazione al marketing

La tua richiesta è stata ricevuta. Ti ricontatteremo a breve.
An error is occurred, please try it again later.
Informazioni generali e legali

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Termini e condizione del Concorso 10 anni di oscilloscopi Rohde & Schwarz

1. Il concorso a premi “10 anni di oscilloscopi Rohde & Schwarz” (di seguito il “Concorso”) è organizzato da Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Monaco di Baviera, Germania, Tel. +49 89 41 29 0 (di seguito “R&S).

2. Tutti i partecipanti possono registrarsi al concorso dal 1 gennaio 2020 al 31 dicembre 2020 comunicando il loro nome, azienda e indirizzo e-mail lavorativo.

3. La partecipazione al concorso è gratuita e non è legata all’acquisto di alcun bene o servizio.

4. Il concorso è aperto alle sole persone giuridiche e solo le persone giuridiche potranno vincere i premi. Non è ammessa la partecipazione delle persone fisiche col proprio nome e account, ma un rappresentante di una persona giuridica può compilare il modulo di partecipazione in nome e per conto della persona giuridica.

5. Il premio è costituito da un oscilloscopio R&S®RTB2000 tra i 10 messi in palio nel periodo dal 1 gennaio 2020 al 31 dicembre 2020:

Premio: 1 oscilloscopio digitale R&S®RTB2000

6. L’estrazione avrà luogo nella sede di Rohde & Schwarz di Muehldorstrasse 15, 81671 Monaco di Baviera. Il vincitore di un premio sarà informato via e-mail entro cinque (5) giorni lavorativi.

7. Il rappresentante autorizzato dalla persona giuridica dovrà informare Rohde & Schwarz della volontà di accettare il premio. In caso di mancata accettazione o di mancata risposta entro due (2) settimane, verrà estratto un nuovo vincitore. Se non si potrà identificare un vincitore entro quattro (4) settimane, il concorso avrà termine e il premio non verrà assegnato.

8. I dipendenti di R&S, i membri delle loro famiglie e le persone coinvolte nel processo di estrazione e i membri delle loro famiglie sono esclusi dalla partecipazione.

9. Non è previsto alcun equivalente in denaro o permuta del premio. I premi non son trasferibili. Tutte le eventuali tasse, imposte, tributi o altri addebiti dovuti nel paese di residenza saranno a carico del partecipante al concorso.

10. I dati personali verranno trattati al solo scopo dell’estrazione del premio e cancellati dopo quattro (4) settimane dall’estrazione, salvo diverso accordo.

11. Ogni partecipante che non rispetta quanto indicato in questi Termini & Condizioni potrà essere squalificato da R&S da questo Concorso. In tali casi, i premi potranno anche essere ritirati retrospettivamente. Qualora un premio venga ritirato retrospettivamente a causa del non rispetto di questi Termini & Condizioni, dovrà essere reso dal vincitore a sue spese, inviandolo all’indirizzo di R&S indicato al punto 1, dopodiché verrà determinato in nuovo vincitore.

12. I partecipanti non potranno richiedere i premi di questo concorso e non è ammesso alcun ricorso legale a questo proposito.

13. Il concorso ed ogni altro legame contrattuale di conseguenza derivante tra R&S e il rispettivo partecipante sarà regolato della legge tedesca, senza possibilità di ricorso in caso di conflitto tra legislazioni. Il tribunale di Monaco di Baviera avrà giurisdizione esclusiva in caso di ogni disputa diretta o indiretta derivante dalla partecipazione a questo Concorso.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.