ZNA | FAQs | Rohde & Schwarz

VNA remote handling of measurements results using SCPI commands

The user is requested to move results from a Network Analyzer to the controller PC or to a network drive.

Calibration of two channels simultaneously with remote commands

ZNA, ZNB, ZND, ZNL – Export of time domain trace

When I export the time domain trace the stimulus values are in Hz, but not in seconds as shown on the screen. How can I get the export in time or distance?

ZBA: Define the VNA as true differential signal generator

I want to use my ZNA as true differential signal generator for a constant CW signal.

Query the data of all traces at once

Is there a way to query the data of all traces at once?

ZNA/ZVA - Mounting of the converters ZCxxx

ZNA, ZNB, ZNL Execution error “Calibration standard is not used“

I perform a calibration with remote commands. With the command to start the calibration sweep with a short standard I get this error message. What is the problem?

Automatically restart with return of the AC power

Is it possible to automatically restart a ZNB with return of the AC power?

VNA - do I really need a sliding match for calibration?

ZNA/ZNB/ZND - Export of all Traces of a channel into a CSV file via remote control

How can I export the traces of a specific channel into one file, i.e. CSV?

ZNA/ZNB: Export all mixed mode S-Parameters

ZNA - Power Added Efficiency Plugin

The attached pdf document explains how to install the tool and how to configure the remote connection to the HMP power supply.

ZNx: Marker read out of other traces with remote commands

I have several traces with markers in one channel. When I query the result of marker 1 I always get the response of trace 1. How can I get the result of marker 1 for trace 2?

ZNA, ZNB, ZND - Power off after stop of the Sweep?

Is the auto cal unit ZV-Z53 with 75 Ohms accepted from ZNB/ZND/ZVA?

I want to do a calibration with 75 Ohms at the ZNB/ZND/ZVA. Do these VNAs accept the auto cal unit ZV-Z53 with 75 Ohms impedance?

Export complex data of a trace with mathematics and time gating

Export complex data of a trace with mathematics and time gating.

Query of the x-values (frequency) of a trace

I query the values of a trace using scpi commands. But I get the y-values only. Is there a possibility to get the y-values also (frequency)?

File-Transfer from Device to PC via LAN connection (simple way)

I have a file on my device. How can I get it in a simple way to my PC?

ZNA / ZVA / ZNB - no correction data for Sliding matches?

I got a calibration kit with a sliding match standard. But there are no correction values for the NWA supplied.

VNA calibration warning that the active cal kit does not contain all needed standards

Active cal kit or cal unit does not contain all standards needed for selected cal procedure.

How do I calculate the logarithmic frequency steps for the horizontal axis?

How do I calculate these frequency points when I have a logarithmic sweep and know the center frequency, the span and the number of sweep points?

Apply an offset to a limit line

I have an existing limit line. Is it possible to apply a vertical offset?

FAQs for Product R&S®ZNA