52 Results
License Keycode for VNAMUC is not accepted
Cannot use internal display and external monitor together at the same time.
Calibration of two channels simultaneously with remote commands
German keyboard driver
Changing the update display rate of a sweep with many sweep points.
Longer sweep times in CW mode
Is there a way to query the data of all traces at once?
How can I change the display resolution when I use an external monitor?
ZNA/ZVA - Mounting of the converters ZCxxx
VNA - do I really need a sliding match for calibration?
TRL calibration - middle of line or end of line
How can I delete Cal Kit Data?
Dividing a trace by two
Loading an S-parameter file from a PC into a memory trace
4 Port Calibration with a 2 Port automatic calibration kit possible?
I trigger this single sweep with the RSZVB_Send_Trigger_and_Wait_for_OPC driver, but this driver does not wait for the complete 10 sweeps. If I don't use averaging, this program is works.
Converting the real and imaginary numbers to magnitude in dB and phase in degrees.
How can I switch from remote to local state via remote control?
Sending a remote Control Command internally
Calibration with Auto Cal Kits and inserted attenuators
Which settings should I use for the Transform Time Domain mode?
All four S-parameter remote set up
Calibration Unit and Remote Calibration
Connect Generator via LAN
Most accurate way to measure the length of a cable with a VNA
Reading the magnitude (dB) and phase (degrees) values directly
Calibrating a vector network analyzer (VNA) with different connectors on each port
How to bisect the result in dB with Trace Mathematics
Restore the Auto Logon Configuration
Deactivation of Ports
Source Power Calibration is very slow.
Login Password for ZVA
ZVA - One Path two Port Calibration with Port 3 and 4
I query the values of a trace using scpi commands. But I get the y-values only. Is there a possibility to get the y-values also (frequency)?
Recall of user's own calibration kits and connectors via remote
Improve the calibration procedure for different setups
Differential data export
Calculate the mixed-mode S-parameter from an S4P file
What is the correct pin layout of the DC inputs on the network analyzer's rear panel?
How to use the User Def. Math functionality
I got a calibration kit with a sliding match standard. But there are no correction values for the NWA supplied.
Remote Control: Change the byte order in FORMAT REAL
I want to use Port 1 and Port 3, so I tried to switch them on by setting the value to 1 (the default value) and to switch off Port 2 and Port 4 by setting the value to 0. But this does not work. How do I set the ports?
I have set my VNA to single sweep mode and switched on averaging with a factor of 10. But when I restart the single sweep, it stops after 1 sweep and the averaging is not done.
Connection of an external Monitor to ZVA
Mixer measurement: Conversion gain too low
How can I start a SSST calibration?
Control external Generator in Fast Sweep Mode
How to export Touchstone s2p files?
How do I calculate these frequency points when I have a logarithmic sweep and know the center frequency, the span and the number of sweep points?
Reverse sweep / backward sweep
What is the function of "Resolve pool link" in the calibration manager?