MXO 3 - Zone Trigger vs Keysight HD3

See how the standard and unique zone trigger capabilities on your R&S®MXO 3 oscilloscope compares to limited functionalities on the Keysight HD3

MXO 3 - Form Factor vs Keysight HD3

The R&S®MXO 3 allows up to 8 channel with a large 11.6 " full HD display in a more compact design compared to Keysight HD3

MXO 3 - Product Pitch

Introducing the R&S®MXO 3, the next member in the MXO family. Building on the breakthrough technology of the mxo series oscilloscopes, the MXO3 comes with familiar user interface fast and precise performance and empowers engineers to debug, test, and innovate with greater speed and confidence in a comact form factor.

MXO 3 - Mask Testing

Detect signal anomalies effortlessly with the R&S®MXO 3 Mask Testing. Quickly spot deviations, ensure signal integrity, and maintain the highest quality in your designs.

New family member MXO 3

Meet the R&S®MXO 3, the newest member of the MXO oscilloscope family. Building on the legacy of precision, speed, and innovation, it brings the next level of performance to your lab

MXO 3 - Toolbar vs Tektronix MDO3

With the R&S®MXO 3 toolbar funcionality you can individaulize your oscilloscope to your needs and helpy you to be more productive. See how the MXO 3 series oscilloscopes outperformes the Tektronix MDO3 in your daily work.

MXO 3 - UI

The R&S®SmartGrid of R&S®MXO 3 series oscilloscope helps to configure an individual layout of the waveform display, while the toolbar enables quick access to important tools and provides the maximum flexibility

MXO 3 - XY Mode

In the MXO3’s hardware-based XY mode, each channel can be configured individually. Enjoy full control, faster measurements, and precise visualization of complex signal relationships.

MXO 3 - Decoding I2C

Quickly and reliably trigger and decode packets from your I2C bus using either analog or digital channels as serial bus inputs. See how you can flexibly configure the trigger, change the bit rate or treshold voltage.

MXO 3 - Acquisition Rate

Capture every detail with theR&S®MXO 3 Oscilloscope, reaching up to 4.5 million waveforms per second. Never miss a rare event — fast, precise in a compact form.

MXO 3 - Decoding SPI

Quickly and reliably trigger and decode packets from your SPI bus using either analog or digital channels as serial bus inputs. See how you can flexibly configure the trigger, or display the decode table.

MXO 3 - Math vs Tektronix MDO3

With math funcionalities implemented in hardware, the R&S®MXO 3 is much faster compared to the Tektronix MDO3.

MXO 3 - Spectrum vs Tektronix MDO3

Compare R&S®MXO 3 spectrum capabilities to Tektronix MDO3 and see the difference in performance.

MXO 3 - Digital Trigger vs Tektronix MDO3

R&S®MXO 3 digital trgger, allows you to trigger reliable on the smallest signal detail compared to Tektronix MDO3

MXO 3 - Form Factor vs Tektronix MDO3

The R&S®MXO 3 allows up to 8 channel with a large 11.6 " full HD display in a more compact design compared to Tektronix MDO3

MXO 3 - Math & Equation Editor

The R&S®MXO 3 comes with a powerful Math & Equation Editor, letting you create custom calculations and analyze signals exactly the way you need.

MXO 3 - Zone Trigger vs Tektronix MDO3

See how the standard and unique zone trigger capabilities on your R&S®MXO 3 oscilloscope compares to limited functionalities on the Tektronix MDO3

MXO 3 - SmartGrid vs Tektronix MDO3

Save time with the highly intuitive user interface and customizable Smart Grid with the R&S®MXO 3 compared to the Tektronix MDO3

MXO 3 - Swiss Army Knife

The R&S®MXO 3 — your Swiss Army knife for signal analysis. Multiple instruments, one device: fast oscilloscope, spectrum analyzer, logic analyzer, and more, all in a single compact and powerful platform.

MXO 3 - Zone Trigger

Use zone trigger to define events graphically, also on your math signals. Use this standard and unique capability on MXO oscilloscopes to trigger on specific events on your signals.

MXO 3 - HD Mode

The R&S®MXO 3 series oscilloscopes incorporate a 12 bit A/D converter for precise vertical sampling to give users the highest accuracy, even at the fastest sample rates. Additionally, the standard HD mode offers users a tradeoff between bandwidth and resolution, achieving up to 18 bit vertical resolution.

MXO 3 - Fast FFT

The R&S®MXO 3 oscilloscopes comes with up to 50.000 FFT per second and independent time and frequency settings. Switch seamlessly between domains, explore every detail, and uncover insights faster than ever before.

MXO 3 - Toolbar vs Keysight HD3

With the R&S®MXO 3 toolbar funcionality you can individaulize your oscilloscope to your needs and helpy you to be more productive. See how the MXO 3 series oscilloscopes outperformes the Keysight HD3 in your daily work.

MXO 3 - Math vs Keysight HD3

With math funcionalities implemented in hardware, the R&S®MXO 3 is much faster compared to the Keysight HD3.

MXO 3 - Digital Trigger

Experience the most sensitive digital trigger with the R&S®MXO 3 Oscilloscope. Detect even the smallest events with precision and confidence, staying true to the MXO legacy of accurate, reliable measurement.

MXO 3 - ScopeStudio

Take your analysis further with Scope Studio, the PC-based software fully compatible with the R&S®MXO 3 Oscilloscope. Capture, visualize, and analyze signals on your computer, combining the power of MXO3 with the flexibility of a desktop environment.

MXO 3 - EMI Debugging

Tackle interference head-on with the R&S®MXO 3 EMI debugging functionalities. Identify, analyze, and resolve electromagnetic issues quickly, ensuring your designs meet compliance and perform flawlessly.

MXO 3 - Spectrum vs Keysight HD3

Compare R&S®MXO 3 spectrum capabilities to Keysight HD3 and see the difference in performance.

MXO 3 - Digital Trigger vs Keysight HD3

R&S®MXO 3 digital trgger, allows you to trigger reliable on the smallest signal detail compared to Keysight HD3

MXO 3 - SmartGrid vs Keysight HD3

Save time with the highly intuitive user interface and customizable Smart Grid with the R&S®MXO 3 compared to the Keysight HD3

Compression point measurement with ZNB3000

Compression point measurement with ZNB3000

Two-tone intermodulation measurement with ZNB3000

Two-tone intermodulation measurement with ZNB3000

Precision in under 5 minutes – How to detect RF interference

Watch how Masha uses the R&S®FPH to track down unwanted RF signals fast and reliably in any environment.

Cutting-edge test solutions for Ku- and Ka-Bands

Discover new test methods for Ku- and Ka-Bands with a robotic arm simulating a realistic satellite flyby. Combined with the CMX500 it enables comprehensive testing, including advanced beamforming capabilities.

Solid-state 18GHz, 300W amplifier - Phil Parente

EMC+SIPI debug challenge - Elizabeth McKenna

Portable Radiated Emissions Testing - Aaron Lutz

EMC Automation with Dual ESW EMI Receivers - Sean Lynch

Introducing the new MXO 3 oscilloscope

Ready for an oscilloscope that blows the competition out of the water?

GaN EMC switching challenge

44 Ghz EMC Antennas

Conducted emissions

ARDRONIS Effect

Discover the revolutionary drone protection solution for military operations. Discover ARDRONIS!

Uncover the unkown

Get insights in the powerful counter drone solution for a more secure world. Discover ARDRONIS!

Precision in under 5 minutes – Tips and tricks with a VNA

Are your RF measurements reliable? Don't guess! This quick tutorial demonstrates how to use a VNA to ensure precise, dependable results for filters, antennas & more. Learn the importance of calibration in under 5 minutes.

Explainer video: Exploring MIL-STD-461

In this video, we explore MIL-STD-461, the military standard for electromagnetic emissions, and how Rohde & Schwarz EMI test systems utilize advanced methods like the FFT time domain mode to enhance measurement speed and accuracy in EMI testing.

Precision in under 5 minutes: Tips and tricks on EMI debugging

In this episode of "Precision in Under 5 Minutes" Masha explores the world of electromagnetic interference (EMI) troubleshooting with the MX04 Oscilloscope and the FPH Handheld Spectrum Analyzer.

Explainer video: Automotive radar EOL calibration and alignment using the R&S®RadEsT

This video explains how the RadEsT target generator offers an accurate, space-efficient and more sophisticated alternative to mechanical reflectors for EOL automotive radar calibration and alignment

Precision in under 5 minutes: LCR meter vs impedance analyzer

Explore the differences between an LCR meter and an impedance analyzer - two essential tools for precise electrical measurements.

#ThinkSix Tech Talk: AI in wireless communications – Neural receivers based on AI/ML

Join our experts as they review a recent milestone in our collaboration with NVIDIA Research on developing and testing neural receiver architectures.

Getting Started with the SMCV100B

This video provides an short introduction to how HD Radio receivers are tested using the Rohde & Schwarz SMCV100B vector signal generator

Getting Started with the SMCV100B

Getting Started with the SMCV100B

This video explains how to use a Rohde & Schwarz SMCV100B vector signal generator to create those test signals

Getting Started with the SMCV100B

Getting Started with the SMCV100B

FSWX signal and spectrum analyzer

Learn more about the FSWX, the first signal and spectrum analyzer with multichannel spectrum analysis, cross-correlation (x-correlation) and I/Q preselection.

FSWX in action

Watch the revolutionary signal and spectrum analyzer FSWX in action.

Achieving highest security by combining metal detection with mmWave screening

Learn about the Rohde & Schwarz and Garrett partnership to provide an integrated solution for high security applications.

R&S®QPS Server - making data actionable

Security screening operations are becoming increasingly data driven. Learn how the R&S®QPS Server can improve decision making and expedite security processes.

Automated Passenger Screening (APS) explained

Learn about the Rohde & Schwarz and dormakaba partnership to provide an automated passenger screening solution for passenger checkpoints.

QPS201 Auto-Scan explained

Learn how the QPS201 Auto-Scan feature automatically guides screened persons in the correct position for security screening.

Transforming employee screening with the QPS Walk2000

Learn how Dallas Fort Worth International Airport was able to streamline its employee screening portal with technology solutions.

Passenger screening reimagined with walk-through security scanners

Frankfurt is the world’s first airport to regularly employ walk-through scanners for passenger security checks.

Change in EMC testing can feel overwhelming.

Application video: Chinese GNSS testing

This Capplication video about hinese GNSS demonstrates how chipset manufacturers, module providers, Tier 1s, and certification labs can ensure compliance with the new Chinese GNSS standard.

AI/ML-based CSI feedback enhancements with the R&S®CMX500 one-box signaling tester

Learn more about two different setups for testing AI/ML CSI compression, both using the R&S®CMX500 base station emulator.

The Potential of Sub-THz Frequencies with the FC330ST/SR Frequency Converters

A throwback to the European Microwave Week 2024 and a quick run-through of wideband signal generation and analysis in the sub-THz frequency range, featuring the SFI wideband IF vector signal generator, FC330 H-band converters, and RTP oscilloscope.

5G as a full system provider (Solution for regulatory authorities)

At MWC 2025, we showcased our enhanced 5G monitoring and testing portfolio. Rohde and Schwarz is the first full system provider for license compliance, interference hunting and coverage measurements for 5G mobile networks

Time Domain Analysis for ESMW

The ESMW ultra wideband monitoring receiver is the core component of our future-proof spectrum monitoring systems for fixed, mobile and transportable stations. Here, at MWC2025, we are launching the much expected time domain analysis functionality for the ESMW with gated measurements, which is crucial for license compliance and interference hunting in 5G networks.

Network testing & monitoring

Private 5G Networks enable business critical process in the verticals where they are used. R&S provides the needed solutions to test private 5G networks from rollout and acceptance to network monitoring and troubleshooting. This year we are launching our R&S®LCM network probe, that is used both for network monitoring together with R&S®SmartMonitor, but also for network verification, acceptance and troubleshooting.

AI-powered network visibility

Discover AI-powered deep packet inspection in action! How does AI-driven encrypted traffic intelligence (ETI) enhance transparency in large-scale telecom networks? Watch Anna Vilshöfer break it down and see how our next-gen DPI is shaping intelligent networks

Tripod

Transportable Monitoring Stations are a vital part in spectrum monitoring set ups. For temporary missions, robust set ups are required with easiest deployment concept. Our innovative System is a comprehensive solution for regulators and critical infrastructure requiring minimal infrastructure on-site. They enable full network integration into our ARGUS and CEPTOR monitoring software. To simplify the deployment, we've designed a mounting concept for tool-less installation at any site.

UWB radar target simulatio

R&S has developed a test demonstration for ultra-wideband radar target simulation that combines a vector signal generator with a signal analyzer and control software. Learn how this innovative solution ensures the precise and repeatable verification of ultra-wideband chipset and device performance.

Customized 5G signals for FR3 and NTN testing

Learn about typical production measuerments for FR1 base station and small cell testing.

Network energy saving testing

In this demo, Rohde & Schwarz and VIAVI Solutions in collaboration with Analog Devices are showcasing how advanced energy saving features on an O-RU platform save energy under real-world traffic loads.

ML-based CSI-RS feedback enhancements

This demo showcases an industry-first implementation of ML-based CSI-RS feedback, achieved in partnership with Qualcomm Technologies.

FR3 device testing

Discover the feasibility of FR3 using the CMX500 OBT in a maximum throughput use case at a 13GHz based on Qualcomm Technologies’ 5G mobile test platform.

Physical layer testing for base stations

Learn about typical production measuerments for FR1 base station and small cell testing.

NR-NTN testing - connectivity redefined

Discover our new tool Constellation Insight, which, when paired with the CMX500 one-box tester, simplifies the configuration and deployment of non-terrestrial networks.

AI-powered scripting

Discover how our AI-based scripting assistant on the CMX500 one-box signaling tester revolutionizes mobile phone testing in this demo.