In the fast-paced world of automotive manufacturing, ensuring reliability and precision in radar sensors is paramount. Rohde & Schwarz provides advanced production testing solutions for automotive radar sensors and empowers tier 1 suppliers to deliver exceptional performance, safety and efficiency.

13-Mar-2025

10BASE-T1S Ethernet enables the integration of diverse sensors into an automotive-Ethernet vehicle supply system, for example short-range radar sensors for detecting blind spots or ultrasonic sensors for the parking assistant. For reliable operation of the functions, data transmission over 10BASE‑T1S Ethernet must be assured at all times and in every climatic environment. Functionality must be tested during development and in production. Only 10BASE-T1S Ethernet interfaces that have passed compliance testing in line with IEEE 802.3cg can be deployed in vehicles. Consequently, vehicle manufacturers and their suppliers need measuring equipment that allows them to perform these tests quickly and reliably.

15-May-2020

Test, calibrate and verify high-performance automotive radar sensors with the R&S®ATS1500C CATR antenna test system and the R&S®AREG100A automotive radar echo generator.

13-Jan-2020

The antenna patterns of automotive radars provide a wealth of information that is of vital importance during radar development and validation.

28-Oct-2020

Integrated sensing and communication (ISAC) is a pillar of 6G. Combining two different yet similar worlds – communications and environmental sensing – brings the future to life in the 6G era. The key ISAC drivers are beamforming with MIMO arrays, artificial intelligence (AI), modern modulation schemes and dense network infrastructure. The R&S®AREG800A automotive radar echo generator is a core element of a versatile research and development test solution in the ISAC community.

11-Mar-2024

Today’s cars are highly integrated and interconnected. Up to 150 embedded electronic control units (ECUs) in a car secure a convenient and safe driving experience. Examples of ECUs include transmission control modules, ECUs for air conditioning systems, and even self-updating 5G-ready telematics control units.

06-Jul-2020

World’s first fully electronically steerable antenna array.

27-Jun-2023

Automated testing against the Chinese national GNSS test standard (GB/T 45086.1‑2024) with R&S®CMWrun sequencer software and the R&S®SMBV100B vector signal generator

20-Feb-2025

Today’s infotainment units offer a wide range of features to truly embody the concept of the connected car.

14-Jun-2018

Oscilloscopes are increasingly used to analyze pulsed signals such as radar signals for aerospace and defence as well as automotive applications. The oscilloscopes’ wide analysis bandwidth and manifold trigger capabilities, make them a good fit for the increasing demand for higher bandwidths and accurate signal detection in these applications. R&S®VSE vector signal explorer software is a powerful tool for comprehensive analysis of a variety of signals, providing full support to the Rohde & Schwarz oscilloscope advanced trigger system. Adjusting the trigger settings enables pulses and pulse sequences to be isolated and run full pulse analysis using the R&S®VSE vector signal explorer software.

03-Feb-2021

Testing radomes, bumpers, QAR50 Ensure a high level of performance and reduce performance degradation of automotive radar sensors caused by radomes and bumpers with the R&S®QAR50.

21-Apr-2022

Automatic functional testing of roof antennas

05-Jul-2007

Integrating the R&S®SMBV100B GNSS simulator into the AVL DRIVINGCUBE™ toolchain creates new possibilities for validating advanced driver assistance systems and autonomous driving functions at the vehicle level. Combining a complete vehicle on a vehicle test bed with physical sensor stimulation results in fast, reproducible and cost-efficient testing. All possible driving scenarios can be executed under realistic and safe conditions.

09-Jan-2020

Radar technology is essential for state-of-the art and future vehicles on the path to full autonomous driving. Radar sensors deliver critical information about the surrounding traffic environment or monitor the interior of the vehicle. As safety-relevant parts, radar sensors must adhere to specifications and regulations.

12-Dec-2022

Due to recent security concerns, ultrawideband (UWB) technology is making its way into automotive key fobs. Rohde & Schwarz offers a flexible test solution for the high demands of R&D and highthroughput production environments.

21-Mar-2017

Drivers rely more and more on advanced driver assistance systems (ADAS) based on radar technology. The radar sensor delivers information about the surrounding traffic environment. It is a must for every radar sensor to detect wanted signals from real objects also in the presence of unwanted interferers. The R&S®AREG100A provides a powerful solution for testing the immunity of radar sensors against interferers.

14-Aug-2018

This paper describes the measurement of additive/residual phase noise of power amplifiers or multipliers for example for automotive RADAR sensors at 80 GHz using the interferometric measurement approach in combination with a phase noise and VCO tester R&S FSWP. The setup provides a way to characterize the additive/residual phase noise of amplifiers down to -150 dBc/Hz at 100 kHz offset even in the microwave range at 80 GHz.

11-Sep-2024 | AN-No. 1EF117

Electronic systems like electronic control units (ECU) must pass several stringent qualification tests in order to be approved for automotive use. These tests include a reverse polarity test which is specified as part of ISO 16750‑2. In line with the specification, the electronic module must withstand a negative supply voltage for a specific time without suffering any damage. The R&S®NGU401 source measurement unit (SMU) is ideal to perform this task, plus it provides automated testing capability.

23-May-2022

Emergency Road Assistance (ERA-GLONASS) is a service provided in the Russian Federation with thegoal of reducing response times for accidents or other emergencies on the roadways. This application note briefly describes the technology behind ERA-GLONASS and presents conformance tests for ERAGLONASS using the R&S®CMW500 RF tester and the R&S®SMBV100A vector signal generator. A Test software for ERA-GLONASS makes it quick and easy to perform these tests with the GSM or WCDMA wireless communications standard. It also shows a test solution for GNSS performance tests for ERAGLONASS using the R&S®SMBV100A vector signal generator and the option R&S®SMBV-K360 together with CMWrun.

24-Jan-2018 | AN-No. 1MA251

With recent enhancements in semiconductor technology the microwave frequency range beyond 50 GHz becomes more and more attractive especially for wideband communication applications like 802.11ad, microwave links or automotive RADAR. Low phase noise is essential for these applications to work properly. Accurate measurement of phase noise is needed to improve the performance. However, test setups at these frequencies become difficult, especially when cross correlation of two receive paths is needed to suppress additional phase noise added by the local oscillators or mixer stages. Two external harmonic mixers in combination with a commercially available phase noise tester are used for phase noise analysis. Signal sources with frequencies up to 500 GHz can theoretically be measured with this setup.

05-Feb-2018 | AN-No. 1EF101

For several years, automobile makers and government agencies have sought ways to improve safety on roadways and effectively manage traffic flow. As wireless communication systems are advancing, the vision of automobiles talking to each other and to roadside units is becoming a reality. These planned automotive wireless communication systems are known as ITS (Intelligent Transportation System). This paper will provide an overview of the current status of the ITS worldwide with a focus on the IEEE 802.11p PHY. Additionally, the paper provides information on test and measurement solutions for devices and components used in ITS.

23-Jan-2014 | AN-No. 1MA152

The application note address test and measurement possibilities for DVB-S2 and DVB-S2X signals in the Ku & Ka -band. The AN includes detailed description of measurement setups, DVB-S2 and DVB-S2X signal generation, up-conversion and signal quality (Error Vector Magnitude and Modulation Error Ratio) analysis in the Ku & Ka-band using Rohde & Schwarz instruments.This paper is intended towards satellite equipment manufacturers, network operators, government & authorities, CE receiver chip set manufacturers, car manufacturer and automotive infotainment system manufactures.

08-Mar-2016 | AN-No. 1MA273

More and more everyday items such as household appliances, vehicles, lights, etc. are now connected to the Internet, forming what is known as the "Internet of Things". Even clothing with sewn-in sensors to measure vital functions can now connect to the Internet and transmit data to cloud services. These different things use a variety of wireless technology standards to establish a connection. Due to its popularity, one of the most important standards is Bluetooth (or Bluetooth Low Energy). Before a new product with Bluetooth functionality can be launched, the qualification process defined by the Bluetooth SIG must be successfully completed. To save time and money, performance tests need to be performed in the development stage. This application note describes how to use the R&S CMW platform to perform the measurements defined in Bluetooth test specification version 5. As an alternative solution, we also cover how to perform almost all of the measurements with a spectrum analyzer and signal generator.The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Rohde & Schwarz is under license.

19-Jun-2017 | AN-No. 1MA282