Key facts
The R&S®BBA130 broadband amplifiers provide RF output power between 22 W and 13000 W over the frequency range between 80 MHz and 6 GHz. The robust amplifiers offer flexible setting options so that an optimal RF signal can be generated for the specific application. It is therefore possible during operation to adjust the bias point for the transistors between Class A and Class AB and to change the mismatch tolerance at the output to provide more power. The air cooled amplifiers have a compact, modular design and are suitable as desktop models or can be installed in a rack. Its upgradability in frequency and power safeguards customers' investment.
Quick links
Robust and scalable with a broad portfolio
The R&S®BBA130 broadband amplifiers are state-of-the-art solid state microwave amplifier encompass altogether three frequency ranges: 80 MHz - 1 GHz (BC), 0.69 GHz - 3.2 GHz (D) and 2.5 GHz - 6 GHz (E) with different power classes between 22 W and 13000 W. They can be flexibly scaled and upgraded in terms of frequency and power. It secures customers' investments and offers them the flexibility to adapt their systems to new requirements at a later point in time.
Outstanding linearity
With R&S®BBA130 you can set the transistor bias to Class A, Class AB or anywhere in between in order to change the characteristics of the output signal. A bias point in Class A provides excellent linearity with good harmonic performance. A bias point in Class AB permits accurate reproduction of pulsed signals as well as improved efficiency. To generate a clean CW signal for a device test, operate the R&S®BBA130 in Class A. To accurately amplify pulsed signals, select a bias point in Class AB.
Maximum output power versus higher mismatch tolerance
The R&S®BBA130 allows you to choose between high maximum output power when there is a good impedance match (maximum VSWR approx. 2:1) typically during design and product validation tests or higher mismatch tolerance with a subsequent reduction in power (starting at about VSWR 6:1) for EMC applications involving poor matched antennas or for DUT measurements with an input impedance that deviates significantly from 50 Ω. It must continue to produce the desired output power for as long as possible.
Compact and modular with extensive switching options
The design of R&S®BBA130 is optimized for maximum flexibility in a small footprint. The compact, modular design of the amplifier stages and other components allows the setup of highly integrated systems based on 19" rack units. The frequency and power of these rack units can be flexibly configured. Numerous switching options allow you to mix and match the individual amplifiers to a single system with multiple frequency bands to obtain the best configuration for your specific application.
Flexible control and operation
The R&S®BBA130 is operated via the display and the buttons on the front panel. This is ideal for use in labs and makes it easy to change settings. In addition the R&S®BBA130 can be conveniently operated via its graphical user interface using a computer. The web GUI integrated into the R&S®BBA130 is called up via LAN and web browser. The standard Ethernet interface makes it possible to automate test sequences using remote control SCPI commands.
Order number 5355.8250.02
GPIB Remote Control
External converter
Order number 5355.8250.03
GPIB Remote Control
For racks up to 30 HU
Order number 5355.8250.04
GPIB Remote Control
For racks higher than 30 HU
Order number 5355.8866.02
RF Input Switch (1:2 or 2:1, N)
The last two digits of the order number depend on the system configuration
Order number 5355.8950.02
RF Input Switch (1:6, N)
Order number 5355.8795.02
RF Output Switch (2:1 or 1:2, N)
The last two digits of the order number depend on the system configuration
Order number 5355.8895.02
RF Output Switch (2:2, 7/16)
The last two digits of the order number depend on the system configuration
Order number 5355.8989.02
RF Output Switch (2:2, 7/8" EIA)
Order number 5355.8943.02
RF Output Switch (2:2, 1 5/8" EIA)
Order number 5355.8995.02
RF Output Switch (6:1, N)
Order number 5355.8114.02
Fast Amplifier Mute
For applications above 3 MHz
Order number 5353.9236.03
DC Block Input Protection (N)
Order number 5355.8837.02
RF Forward/RF Reflected Sample Ports (N front)
Order number 5355.8837.03
RF Forward/RF Reflected Sample Ports (N rear)
Order number 5355.8850.02
Detected Forward/Detected Reflected Sample Ports (N front)
Order number 5355.8850.03
Detected Forward/Detected Reflected Sample Ports (N rear)
Order number 5355.8872.02
Sample Port Switch (dual-port, N front)
Order number 5355.8872.03
Sample Port Switch (dual-port, N rear)
Order number 5355.8889.02
Transparent I/O
Order number 5355.6105.02
Ultra Broadband Load
From DC to 18 GHz
Related products
Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.
You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found
Terms & Conditions of the Prize Draw 10 years Rohde & Schwarz oscilloscopes
1. The prize draw “10 years Rohde & Schwarz oscilloscopes” (herein referred to as “Draw”) is organized by Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Germany, Tel. +49 89 41 29 0 (herein referred to as “R&S).
2. All participators can register to the draw during January 01, 2020 to December 31, 2020 with their name, company name and business e-mail.
3. Participation is free of charge and not dependent on the purchase of goods or services.
4. The draw is only open to legal entities and only the legal entities are able to win the prizes. An individual person is not allowed to participate on its own name and its own account but as a representative of a legal entity filing the participation form in the name of and on behalf of the legal entity.
5. The prizes to win are 1 of 10 R&S®RTB2000 within the time frame January 1, 2020 to December 31, 2020:
Prize: 1x R&S®RTB2000 Digital Oscilloscope
6. The draw takes place at Rohde & Schwarz headquarters, Muehldorstrasse 15, 81671 Munich. The winner of the prizes will be informed by e-mail within 5 (5) working days.
7. The authorized representative of the legal entity shall inform Rohde & Schwarz about the acceptance of the price. In case of the denial of the acceptance, or no answer within two (2) weeks, a new winner will be drawn. If no winner can be determined within four (4) weeks, the draw ends and the prize forfeit.
8. R&S’ employees and members of their families and also person being familiar with the process of the draw and members of their families are excluded from filling the participation form.
9. No cash equivalent or exchange of prizes is allowed. Prizes are non-transferable. All taxes, levies, duties, fees and other charges levied in the participant´s country shall be borne by the participant.
10. Personal data will be processed only for the purpose of this prize draw and deleted four (4) weeks after the draw, if not agreed otherwise.
11. Any Participant who does not comply with these Terms & Conditions may be disqualified by R&S from this Competition. In such cases, prizes can also be withdrawn retrospectively. In case a prize is withdrawn retrospectively due to the non-compliance with these Terms & Conditions, it shall be returned by the respective participant at his cost to R&S’ address mentioned under Nr.1 and a new winner will be drawn.
12. The participants cannot claim the prizes of this draw and no legal recourse is permitted in this respect.
13. The draw and any contractual relationship arising therefrom between R&S and the respective participant shall be governed by and construed in accordance with the laws of Germany, without any recourse to the conflict of laws. The courts of Munich, Germany, shall have exclusive jurisdiction in case of any disputes arising directly or indirectly from the participation in this Competition.
* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.
